Schedule and repeat campaigns
Step 4 of the campaign wizard asks When to send. You can send now, pick a date and time to send later, or repeat the campaign on a schedule. This page covers the last two: how to set them up, how to change or cancel them, and what happens when one can't go out.
Who can use it
| What | Plan | Who |
|---|---|---|
| Send now and Schedule for later | Any plan that includes campaigns | Agents, admins and owners |
| Repeat (recurring campaigns) | Growth+ | Agents, admins and owners |
Viewers don't see the Reschedule, Cancel or series controls. A recurring series sends to a saved segment only. See Usage and limits for your plan.
Choose how to send
Step 4 shows three options under When to send:
- Send now starts sending as soon as you confirm.
- Schedule for later sends once, at a date and time you pick. It isn't available for an Upload CSV audience, because those contacts aren't saved. Import them as contacts first, then schedule an all-contacts, tag or segment audience.
- Repeat sends the campaign again on a schedule. It is always listed, but it needs the Growth plan or above and a saved segment.
Schedule a campaign for later
- Build the campaign as usual, up to step 4, and give it a name.
- Under When to send, choose Schedule for later.
- Set the Date, the Time and the Time zone. The time zone starts as your browser's zone. The list is searchable.
- Check the line that reads "Sends …". If the zone you chose differs from yours, a second line shows the same moment in your own time zone.
- Click Schedule campaign, then confirm.
The time must be at least 2 minutes from now and within the next year. A time that doesn't exist in the zone you picked, because the clocks skip it for daylight saving, is rejected: pick another one.
RelayOne works out who receives the campaign when it sends, not when you schedule it. Contacts who join or leave the audience before then are included or skipped, and opt-outs are honoured at that moment. The reach shown in the wizard is only today's estimate.
In Campaigns → All campaigns the campaign shows the status Scheduled with a "Scheduled for …" badge and a countdown. The same badge sits at the top of its insights page.
Reschedule, cancel or reopen
Open the campaign from the list, or use the buttons on its row.
- Reschedule opens a dialog. Pick a new date, time and time zone, then click Save new time. The same 2-minute and one-year limits apply.
- Cancel asks "Cancel this scheduled campaign?" Click Cancel schedule to confirm, or Keep it to leave it. The campaign goes back to Draft with its template and audience kept, and nothing is sent.
A draft can't be reopened in the wizard. To send a cancelled campaign, open it and click Clone campaign. The wizard opens with the template, audience and message already filled in (named "Copy of …"), and you send or schedule the copy as normal. The cancelled draft stays in the list as a record.
What happens at send time
A scheduled campaign fires by itself, within about a minute of its time. You don't need to be signed in. Its status changes to Sending, and then to Sent as for any campaign.
When a scheduled campaign can't be sent
Before it sends, RelayOne checks the campaign again. If a check fails, the campaign gets the status Failed. Its insights page shows a banner titled "Not sent: …" with the reason, and the person who created it is told.
| Banner | What happened | What to do |
|---|---|---|
| Not sent: your balance was too low | There wasn't enough prepaid balance when it was due. | Top up your wallet. |
| Not sent: your plan's campaign limit was reached | Your plan's campaign allowance was used up. | Upgrade or wait for it to reset. See Usage and limits. |
| Not sent: the sending number was disconnected | The WhatsApp number it sends from wasn't connected. | Reconnect it in Settings → WhatsApp numbers. |
| Not sent: the template wasn't available | The template was missing, or Meta no longer had it approved. | Check its status in Templates. |
| Not sent: nobody was in the audience | The audience had no contacts when it was due, or its segment had been deleted. | Check the audience. |
| Not sent: your plan doesn't include campaigns | Campaigns weren't available on your plan when it was due. | Upgrade. |
| Not sent: something went wrong | The campaign couldn't start for another reason. | Try again. If it keeps failing, contact support. |
Fix the cause first. Then, on the failed campaign's insights page, click Send now to start a new campaign straight away, or Reschedule to pick a new time. Either one creates a new campaign with the same template, audience and sending number. The failed one stays as a record. If a failed campaign doesn't record its sending number, these buttons aren't offered and you can use Clone campaign instead.
Repeat a campaign Growth+
A recurring campaign, or series, sends the same template to a saved segment again and again. Each run is an ordinary campaign.
- Build the campaign and choose a saved segment as the audience. A series re-reads the segment on every run, so contacts who match it later are included.
- On step 4, under When to send, choose Repeat.
- Under Repeats, choose Daily, Weekly or Monthly.
- Weekly adds On these days: pick at least one day.
- Monthly adds Day of the month. In a month without that day, the run goes out on the last day of the month.
- Set the Time and Time zone, and when the series Starts on. Every series has its own time and zone.
- Under Ends, choose Never, On a date, or After a number of runs.
- Under Who gets each run, choose who is included:
- Once per contact: nobody gets the campaign twice. Later runs reach only contacts new to the segment.
- At most every N days: a contact is skipped if an earlier run messaged them within that many days (1 to 365).
- Every run: everyone in the segment gets every run.
- Check Repeat schedule and its Next runs preview, then click Create recurring campaign and confirm.
Opt-outs are always skipped, whichever option you choose.
A series needs a saved segment that has no excluded tags. If you picked another audience type, step 4 says "Repeating campaigns send to a saved segment" with a Change audience button. If the audience excludes tags, it says "Repeating campaigns can't exclude tags": remove them, or build the exclusion into the segment's own filter.
On a plan without recurring campaigns, choosing Repeat shows an upgrade banner instead of the schedule. See Usage and limits.
The Recurring list
Open Campaigns → Recurring to see your series. Use the filter to show All, Active, Paused or Ended.
The table has these columns: Name, Next run, Runs (for example "3 of 10", or the count so far when the series has no limit), Status and Actions. Click a name to open the series.
| Status | What it means |
|---|---|
| Active | The series runs on schedule. |
| Paused | A teammate paused it. Nothing sends until it is resumed. |
| Ended | It finished or was ended, and won't run again. |
| Paused: plan | A run came due when your plan no longer included recurring campaigns, so the series stopped instead of sending. Upgrade, then click Resume. The next run is worked out from that moment. |
| Paused: error | RelayOne couldn't work out the schedule, so it stopped. Click Edit, check the days, time and time zone, then click Resume. |
If your plan lacks recurring campaigns, the list still shows your series under an upgrade banner.
A series in detail
Click a series to see its schedule, its template and segment, when it starts and ends, who gets each run, and its next and last run. A notice at the top explains why a series isn't running, with the same wording as the table above.
The Runs table lists every run as a campaign, with its status, recipients and the delivered, read, replied and failed counts. Click a run to open its insights, which show a "Part of series …" link back to the series.
The actions are Edit, Pause or Resume, and End. An ended series has no actions.
- Edit changes the name and segment. It also shows the schedule fields (frequency, time, time zone, start, end and who gets each run). Changes apply from the next run, and runs that already went out aren't affected. The template and sending number can't be changed: end the series and create a new one.
- Pause stops it. Resume carries on from the next scheduled time. Missed times are not sent later.
- End asks "End this recurring campaign?" Click End series to confirm. It won't run again and this can't be undone, but its past runs stay in your campaigns.
If a run can't send, for example because of a low balance, that run is marked Failed with the same reasons as above, and its creator is told. The series carries on with the next run. The one exception is a plan that no longer includes recurring campaigns, which pauses the series as Paused: plan.
Troubleshooting
- Schedule for later is greyed out. The audience is an uploaded CSV. Import the contacts first, or send now.
- "Pick a time at least 2 minutes from now" or "Pick a time within the next year". Move the time inside that window.
- "That time doesn't exist in this time zone". The clocks skip that time for daylight saving. Pick another time.
- A scheduled campaign shows Failed. Find the reason in the table above, fix it, then use Send now or Reschedule.
- Repeat shows an upgrade banner. Your plan doesn't include recurring campaigns.
- Repeat says it needs a saved segment. Choose a saved segment as the audience. Tags can't be excluded.
- A series shows Paused: plan or Paused: error. See The Recurring list.
- A series says "This schedule never runs". No run falls between the start and the end. Change the dates or the number of runs.
Back to Campaigns.